X(S)MF-50/30 Internal Mixer Machinery
The machine is used mainly for mixing purpose in factories in factories of rubber and plastic industries.

1.Inner wall of  U-Otpe mixing compartment ,surface of  upper press stopper are all sprayed with wear-resisting alloy.
2.Cooling water or steam is passed through inner chamber of rotor ,mixing compartment or floating weight.
3.Mixing compartment can be turned over by 1350 around the center of long rotor to facilitate discharge and cleaning.
4.Relief valves are provided at the inlets of mixed-compound extruding cylinder ,dust proofing cylinder and etc .to stabilize working pressure.
5Performance of all sealing devices are reliable without application of lubricant
6.It is easy to change the kind of mixing stock.
Main Technical Specifications
Mixing net chamber volume 50litres
Mixing chamber working volume 35litres
Speed of main rotor 30r/min
Rotor friction ratio 1:1.21
Output of main rotor 55KW
Reduction gear ratio 20
Unit pressure of upper upon mixed compound 0.15-0.20Mpa
Pressure of compressed air 0.6-0.8Mpa
Pressure of cooling water 0.3-0.4Mpa
Total weight 7000kg
Overall dimensions 3360x1600x2680mm